Make absolute measurements of dose at various depths in up to 16 positions throughout the phantom with standard thimble ion chambers.
Make relative dose (fluence dose) measurements using ready pack or radiochromic film placed every 3 cm. Easily compare film to TPS in 3D using four reference marker points in acrylic Phantom Slab.Reference marker points facilitate orientation of film,digital reconstruction and transfer of multiple coronal film views to 3D sagital and transverse images.
Make point dose measurements in any position in the phantom using MOSFET diodes or TLDs.Point dose measurements are critical when evaluating dose to sensitive structures.
Make all three dose measurements simultaneously with one set up and one treatment,saving time. Coronal film placement allows simultaneous ion chamber and film use since the planes are parallel.
Interfaces with treatment planning systems as the TPS recognizes the phantom fiducial system and anthropomorphic shape.
Simulates bone for realistic TPS evaluation.Assists with measuring the absolute dose at isocenter near the spine.
Anthropomorphic design provides intuitive,easy set-up for fast confirmation of treatment plan. Bone and lung insert fields provide high gradient tissue interfaces to evaluate TPS s ability to manage these interfaces. Uncovers edge effect issues related to tissue heterogeneity. Accuracy of the prescribed dose is evaluated and confirmed in simulated patient conditions in the body,excluding extremities. Effectively evaluates junctioning issues of upper neck and half beam block superclav fields.
Unique,versatile design allows many configurations to simulate individual treatment plans. Quick,easy,intuitive set-up.Complete a prostate dose set up and verification in as little as 15 minutes. Easily configure and adjust layered phantom slabs for individual 3D patient simulation. Fine 1 mm scribed black lines for easy laser alignment positioning of phantom.
Operator can visualize the placement of film,chambers and diodes for accurate measurements, thus minimizingregistration errors. Acrylic is characterized in TG 21 for acrylic to water conversion for high energy photon and electron beams. Water equivalent phantoms are not characterized in this protocol.Some water equivalent phantoms may only be characterized for cobalt to ascertain their equivalence to liquid water.Since exacting measurements are essential when dealing with the small field sizes in IMRT,it is important to know the equivalent properties to liquid water that the TG 21 acrylic to water conversion provides. For absolute dosimetry,apply correction factors for acrylic to water which are published in the TG 21 protocol. Standard Imaging combines the required corrections into one table based on depth and energy,allowing the application of only one correction factor.
|2||Chamber Phantom Slabs with 6 cavities each for ion chamber placement|
|2||Acrylic Phantom Slabs for build up thickness|
|2||Lung Phantom Slabs with cavities for simulated lung inserts|
|16||Solid Acrylic Plugs to fill unused ion chamber cavities|
|1||Solid Acrylic Plug with cavity drilled for ion chamber of your choice|
|1||Bone Equivalent Plug|
|1||Lung Equivalent Set with four (4)inserts for lung phantom voids|
Chamber Phantom Slab has six cavities for thimble ion chamber measurement. The diameter of each cavity is� �.Solid acrylic plugs are included to fill the cavities for simulated patient thickness.One solid acrylic plug is drilled for the ion chamber of choice. A bone equivalent plug is included for bone simulation of heterogeneity measurements.
Acrylic Phantom Slab is a solid slab to provide simulated patient build-up material.Four 2 mm steel balls are imbedded in the slab as reference markers for 3D orientation of film on TPS.
Lung Phantom Slab has two cavities for simulated lung inserts,two cylindrical cavities for thimble ion chamber placement and a set of two cedar lung inserts for lung simulation.
MOSFET Diode/TLD Slab,REF 70608,has nine channels for MOSFET diodes or TLD chips which can be placed at any point in a field for point dose measurements.The small channel size was designed not to perturb other measurements so this slab can also be used as a solid slab for increased patient thickness.MOSFET diodes are isotropic for dose measurements from any angle.
Acrylic Phantom Slab,REF 50062,is a solid slab to provide simulated patient build-up material.Four 2 mm steel balls are provided for use as reference markers for 3D orientation of film on TPS.
Carrying Case,REF 50064,has extendable handles and wheels for transport from room to room. Case also protects phantom during shipping. Doc. No. 1194-00 02-15-02
|Height (six slabs)||18.00 cm (7.09 in)|
|Width (each slab)||30.00 cm (11.81 in)|
|Length (each slab)||45.00 cm (17.72 in)|
|Weight (six slabs)||22.7 kg (50.0 lbs)|
|Cavity Diameter||1.90 cm (3/4 in)|
Spechtgasse 32, A-2340 Moedling, Austria
Tel: +432236 41045-0
Fax: +432236 860957